How to Change the Passcode on a Honeywell Safe

Honeywell safes are designed to keep your most precious belongings secure and unharmed. Whether an intruder breaks into your house or a fire sweeps throughout your room, the safe will keep your belongings in the same condition as they were when you placed them inside it. The passcode keeps your safe protected from unwanted eyes at all times. You can reset your passcode by pressing the reset button that's included on all Honeywell safes.

Step 1

Open the safe with your current passcode and locate the red reset button on the inside of the door.

Step 2

Push the button in with your finger momentarily and let go. If you did it correctly, the keypad on the door should emit a quick "Beep" sound.

Step 3

Position the door so you can view the keypad, but do not close the door all the way. Enter your desired passcode. The code must be no less than three numbers and no more than eight. Press the letter "B" on the keypad once you enter the passcode. Close the door.

Tip

If you just bought the safe, you can open it by entering "159A."

references